Effect of Strength Properties on Concrete by Partial

2019-7-1  partially replacing coarse aggregate by waste Cuddapah stones and using PPC Fly ash based as cement. This thesis mix decreased with replacement of natural aggregate with bethamcherla marble stone aggregate. But up to some extent even replaced concrete mixes got optimum results [5]. Fly ash is a byproduct of burnt coal from the Thermal

Effects of Partially and Totally Substitution of Marble

2020-11-28  Effects of Partially and Totally Substitution of Marble Waste as a Fine Aggregate on Workability and Mechanical of marble stone, marble dust is perceived as a waste material [8]. Coarse Aggregate 3 3 3 3 3 3 W/C 0.50 Marble Waste 0% 20% 40% 60% 80% 100% Table 4. Quantification of materials.

Partial Replacement of Cement With Marble Powder

KEYWORDS: Cement (53 grade), Marble powder, Fine aggregate (M-sand), Coarse aggregate (20mm size). 1.INTRODUCTION: This paper aims to focus on the possibilities of using waste materials from different manufacturing activities in the preparation of innovative mortar and concrete. Marble stone industry generates both solid waste and stone

Partial Replacement of Coarse Aggregate with Broken

2018-8-12  The study is aimed at investigating the “Effects of Replacing Partially Coarse Aggregate with Broken Ceramic Tiles in Con-crete Production” while the objectives are to determine physi-cal properties of aggregates to be used, determine workability of fresh concrete via

Impact of marble waste as coarse aggregate on

2016-6-1  The natural coarse aggregate was replaced by marble aggregate by weight in concrete. The mixture proportions of control concrete and concrete containing marble aggregate are given in Table 5 .The concrete was prepared by replacing the natural coarse aggregate by marble aggregate in different percentages 20%, 40%, 60%, 80% and 100% by weight.

Sustainable Concrete by Partially Replacing Coarse

2017-9-7  Partially replacing Coarse aggregate Using Coconut Shell 43 3. METHODOLOGY In this study, natural river sand and manufactured crushed sand as 50%-50% proportion will be used as fine aggregate which passes through a 4.75 mm sieve. The material used will be having maximum particle size of 4.75mm. It

AN EXPERIMENTAL STUDY ON EFFECT OF PARTIAL

2018-6-15  replacing coarse aggregate with pumice stone by 0%, 10%, 20%, 30%, 40% and 50%. K. Guru Kesav Kumar, C. Krishnaveni [4] Studied on partial replacement of aggregate by pumice stone in cement concrete. Their study aims at finding out the sustainability of pumice stone

PARTIAL REPLACEMENT OF COARSE AGGREGATES BY

2017-2-16  beads based concrete is obtained by partially replacing coarse aggregate with different dosages of polystyrene beads volumetrically. The quantities of materials for various mixes are obtained by partial replacement (by volume) of coarse aggregates by EPS beads. Cubes of 150mm size for compressive strength evaluation and

EXPERIMENTAL STUDY ON CONCRETE BY PARTIAL

2017-5-2  the feasibility of using copper slag as coarse aggregates in high-strength concrete. The effects of replacing limestone coarse aggregate by copper slag coarse aggregate on the compressive strength, splitting tensile strength and rebound hammer values of high-strength concretes are evaluated in

BAMBOO AS PARTIALLY REPLACEMENT FOR COARSE

2018-2-25  COARSE AGGREGATE Coarse aggregate can be defined as inert granular materials obtained after crushing a stone. The coarse aggregate used is locally available jelly. Coarse aggregates passing through 20 mm and retained on 12.5 mm sieve are

AN EXPERIMENTAL INVESTIGATION ON PARTIAL

2019-11-7  generates both solid waste and stone slurry. Marble is one of Concrete is a composite material composed of coarse aggregate bonded together with fluid cement that hardens tested for seven different series prepared by partially replacing cement, sand with WMP at proportions of 0-15%

Crushing Marble Into Aggregates

Marble stone partially replacing coarse aggregate. 25 Mar 2013 while crushing rock into aggregate at stone crushing for not only to partially replace the sand, Hebhoub and Coarse waste marble aggregates had 0.1%. Read more

Experimental study on partial replacement of cement by

2017-7-5  Coarse aggregate was crushed stone which was available locally. Maximum size chosen was 10mm down. Tests are conducted to find the properties of coarse aggregate and the results are tabulated in Table 2 Table No.- 2 Physical Properties of Coarse Aggregate 3) Fine Aggregate: Locally available river sand was used as fine aggregate.

Effect of Strength Properties on Concrete by Partial

2017-11-5  Various percentages of shabath waste stone and the shabath dust were partially replaced as coarse aggregate and the optimum percentage of replacement is determined [1]. Concrete specimens were cast with ceramic waste aggregate as coarse aggregate by replacing natural coarse aggregate at 0, 20, 40, 60, 80 and 100%.

PARTIAL REPLACEMENT OF FINE AGGREGATE WITH

2020-12-18  1.2.3 Coarse aggregate: The Maximum size of coarse aggregate used for this investigation is 20mm and the specific gravity is 2.78. 1.2.4 Copper slag: Copper slag is a result gotten during matte purifying and refining of copper. Creation of one ton of copper produces roughly 2.2–3 ton of copper slag. 1.2.5 Marble dust powder: Marble is

An Experimental Investigation on Strengths

2015-2-6  fine and coarse aggregate and combining admixtures partially replacing cement with marble powder, and Stone dust: It is the residue material which is the extraction of basalt rocks to form the fine particles less than 4.75mm through the IS sieve. Locally

Effect of Strength Properties on Concrete by Partial

Cement, fine aggregate, coarse aggregate and water are important constitutes of concrete that are obtained naturally. So we can replace new materials instead of natural sources such as M Sand, fly ash, Metakaolin, etc.Aim of this project is to study the strength properties of the concrete by partially replacing coarse aggregate by waste

To Study the Effect of Steel Fibers on Strength of

2020-4-30  IS Sieve 4.75 mm is termed as coarse aggregate. The coarse aggregates may be of following types:- i) Crushed graves or stone obtained by crushing of gravel or hard stone. ii) Uncrushed gravel or stone resulting from the natural disintegration of rocks. iii) Partially crushed gravel or stone obtained as product of blending of above two types.

Concrete Partially Replacing Materials As Project

Concrete Partially Replacing Materials As Project. 2017-9-1 · project work cement is partially replaced with Rice Husk Ash as 15% fixed by weight of cement & fine aggregate is partially replaced with copper slag as percentage ranging 0%, 10%, 20%, 30% & 40% by weight of sand for M25 grade concrete.

concrete partially replacing materials as project

concrete partially replacing materials as project 」 2015-6-5 · concrete partially replacing materials as project_concrete partially replacing materials as projectBagasse ash partially replaced in the ratio of 0%, 5%, 10%, 15% and 20%by weight of cement in four differentreplacement material to improve qual

PARTIAL REPLACEMENT OF FINE AGGREGATE BY WASTE

2019-6-13  To study the variation of compressive strength of concrete with replacing cement by marble powder at the percentages of 0%,10% ,20% & 30% for the grade of M25 mix proportions of 1:1.87:3.12 water cement ratio 0.5. OBJECTIVE: The present study is aimed at utilizing Waste marble powder as fine aggregate in concrete, replacing natural sand. Marble

Investigation on Partial Replacement of Cement with

2020-9-4  Cement production also results in the release of a significant amount of solid waste materials and gaseous emissions. In addition, of the cement production marble quarrying and processing evolves a huge amount of wastage. During marble processing, 30% of the stone (in case of unprocessed stone) goes to scrap because of being in smaller size and/or irregular shape.

Experimental study on partial replacement of cement by

2017-7-5  Coarse aggregate was crushed stone which was available locally. Maximum size chosen was 10mm down. Tests are conducted to find the properties of coarse aggregate and the results are tabulated in Table 2 Table No.- 2 Physical Properties of Coarse Aggregate 3) Fine Aggregate: Locally available river sand was used as fine aggregate.

AN EXPERIMENTAL INVESTIGATION ON PARTIAL

2019-11-7  generates both solid waste and stone slurry. Marble is one of Concrete is a composite material composed of coarse aggregate bonded together with fluid cement that hardens tested for seven different series prepared by partially replacing cement, sand with WMP at proportions of 0-15%

USE OF MARBLE POWDER AS A PARTIAL

Fine aggregate: The fine aggregate used of a river sand which is, clear from all sorts of organic impurities was used in this experimental program. The fine aggregate was passing through4.75 mm sieve and had a specific gravity of 2.75. The grading zone of fine aggregate was zone III

Recyclability of waste marble in concrete production

2016-9-10  In coarse aggregate form, marble waste replacement exerts more positive impacts as the w/c ratio reduces. In fine aggregate form, marble dust achieved the best results at replacement ratios of 50 and 75%. In these cases, the compressive and splitting tensile strengths were increased by 20–26 and 10–15%, respectively.

Concrete Partially Replacing Materials As Project

Concrete Partially Replacing Materials As Project. 2017-9-1 · project work cement is partially replaced with Rice Husk Ash as 15% fixed by weight of cement & fine aggregate is partially replaced with copper slag as percentage ranging 0%, 10%, 20%, 30% & 40% by weight of sand for M25 grade concrete.

Feasibility of waste marble powder in concrete as

2018-1-1  The study proposes a low carbon technology by replacing cement and sand amalgam with marble powder for its maximum utilization. 2. Research significance. The aim of this research is to explore utilization of waste marble powder. It results from the process of cutting and sawing of marble stone, in order to obtain a finely grained powder.

To Study the Effect of Steel Fibers on Strength of

2020-4-30  IS Sieve 4.75 mm is termed as coarse aggregate. The coarse aggregates may be of following types:- i) Crushed graves or stone obtained by crushing of gravel or hard stone. ii) Uncrushed gravel or stone resulting from the natural disintegration of rocks. iii) Partially crushed gravel or stone obtained as product of blending of above two types.

Experimental Study on Concrete by Partial Replacement

2018-2-18  suitability of crushed stone dust waste as a fine aggregate for concrete has been assessed by comparing its basic properties with that of conventional concrete. Two basic mixes were chosen for natural sand to achieve M25 and M30 grade concrete. The equivalent mixes were obtained by replacing natural sand by stone dust partially and fully.