Partial replacement of sand by granite powder in concrete

waste can be utilized for the preparation of concrete as partial replacement of sand. In order to explore the possibility of utilizing the granite powder as partial replacement to sand, an experimental investigation has been carried out. The percentages of granite powder added to replace sand by weight were 0, 5, 10, 15, 20 and 25.

Experimental study of concrete made with granite and iron

Sep 01, 2016 For 20% partial replacement of sand with granite powder, the split tensile strength was lower than the control cylinders. This observation was different than those of compression and flexural strength. For compression and flexural strength, the 20% replacement of granite powder showed a modest increase rather than a decrease in strength.

Optimization of Granite Powder used as Partial Replacement

Sand. Research on Granite Powder as partial replacement to Cement and Concrete along with M. Sand in making Ready Mix Concrete is scarce and hence this paper investigates the Compressive Strength behaviour of Ready Mix Concrete (RMC) with Granite Powder and Manufactured Sand (M. Sand). MATERIALS 1.

Experimental Study on Partial Replacement of Fine

The test results show clearly that granite powder as a partial sand replacement has beneficial effects of the mechanical properties of high performance concrete. Of all the 6 mixtures considered, concrete with 25% of granite powder (GP25) was found to be superior to other mixtures as well as GP0 and NA100 for all operating conditions. Therefore the

Investigation of Concrete in Partial Replacement of Fine

project granite powder is used with different percentage of 10, 30, 50, 100. The total number of 45 cubes size of 150×150×150mm is cast using the grade of concrete M20, M25, M30. The compressive strength of concrete cubes are compared. In our project was use granite powder 10 to 100% by the weight of sand is taken of making concrete.

Optimization of Granite Powder used as Partial Replacement

Sand. Research on Granite Powder as partial replacement to Cement and Concrete along with M. Sand in making Ready Mix Concrete is scarce and hence this paper investigates the Compressive Strength behaviour of Ready Mix Concrete (RMC) with Granite Powder and Manufactured Sand (M. Sand). MATERIALS 1.

Experimental Study on Partial Replacement of Fine

The test results show clearly that granite powder as a partial sand replacement has beneficial effects of the mechanical properties of high performance concrete. Of all the 6 mixtures considered, concrete with 25% of granite powder (GP25) was found to be superior to other mixtures as well as GP0 and NA100 for all operating conditions. Therefore the

Investigation of Concrete in Partial Replacement of Fine

project granite powder is used with different percentage of 10, 30, 50, 100. The total number of 45 cubes size of 150×150×150mm is cast using the grade of concrete M20, M25, M30. The compressive strength of concrete cubes are compared. In our project was use granite powder 10 to 100% by the weight of sand is taken of making concrete.

partial replacement of sand by granite powder

The main parameter investigated in this study is M30 grade concrete with replacement of sand by granite powder by 0, 25 and 50% and cement was partial replacement with silica fume, fly ash, slag and super plasticizer.Broken granite stones were used as a coarse aggregate in concrete.

Study on the effect of granite powder on concrete

May 02, 2010 The test results showed clearly that granite powder of marginal quantity, used as partial sand replacement, has beneficial effects on the compressive strength and split tensile strength, modulus of elasticity. The highest compressive strength was achieved in samples containing 25% granite powder.

Natural Sand And Granite Powder 970 Words Bartleby

Marble Powder As A Partial Replacement Of Sand 1454 Words 6 Pages. V. CONCLUSION From the test results it is clearly evident that granite powder as a partial replacement of sand proves to be beneficial when Durability properties of Concrete is considered.

EXPERIMENTAL INVESTIGATION ON CONCRETE WITH

6. Manasseh JOEL –“Use of Crushed Granite Fine as Replacement to River Sand in Concrete Production” Leonardo Electronic Journal of Practices and Technologies ISSN 1583-1078 Issue 17, July -December 2010p. 85 96 7 .O. S. Olaniyan, O.M. Afolabi and O.M. Okeyinka “Granite Fines as a Partial Replacement for Sand

(PDF) Use of Stone Dust & Granite Powder as a Partial

For granite powder the optimum level of replacement is up to 10% by weight. 3. On addition of different pozzolanic waste materials (granite powder and stone dust) as a partial substitute of OPC cement the water content required to accomplish the reaction mechanism of cement increases.

A study of the chemical effect of marble and granite

Feb 04, 2020 A distinctive study was undertaken by Abhishek and Pradeep to examine the effect of partial replacement of sand with granite quarry dust and cement with marble powder in concrete. The results indicated that the compressive strength increased gradually by adding up to 10% replacement of cement with marble powder and 20% replacement of fine

STUDY OF PARTIAL REPLACEMENT OF FINE AGGREGATE

crisis, partial replacement of sand with quarry dus t can be an economic alternative. In this project determi ne the strength and durability of concrete by using qu arry dust as sand and comparing with the conventional mi x. Large range of curing period of 28 days are conside r in the present study design mix of M20 grade concrete

EXPERIMENTAL STUDY OF CONCRETE BY PARTIAL

natural sand by CRP at replacement levels of 20, 30& 40 percent. In this experimental study, the main objective is to study the influence of partial replacement of cement with granite powder, and to compare it with the compressive strength of ordinary M 25 grade concrete. Further, trying to find the percentage of granite

Experimental study of concrete made with granite and iron

An experimental investigation has been carried out to explore the possibility of using the granite powder and iron powder as a partial replacement of sand in concrete. Twenty cubes and ten beams of concrete with GP and twenty cubes and ten beams of concrete with IP were prepared and tested.

Investigation on Strength Properties of Concrete with

2. It was concluded that on partial replacement of OPC by 5% and 10% of marble powder and fine aggregate by granite powder gives a gradual increase in compressive strength and also in tensile strength when compared to conventional mix. 3. To minimize the costs for construction with usage of marble powder and granite powder which is freely or

Table 2 from Partial Replacement of Sand with Quarry Dust

Corpus ID: 212579661. Partial Replacement of Sand with Quarry Dust in Concrete @inproceedings{Sukesh2013PartialRO, title={Partial Replacement of Sand with Quarry Dust in Concrete}, author={Chandana Sukesh and K. B. Krishna and P. S. Teja and S. K. Rao}, year={2013} }

Experimental Study on Partial Replacement of Fine

The test results show clearly that granite powder as a partial sand replacement has beneficial effects of the mechanical properties of high performance concrete. Of all the 6 mixtures considered, concrete with 25% of granite powder (GP25) was found to be superior to other mixtures as well as GP0 and NA100 for all operating conditions. Therefore the

Study on the effect of granite powder on concrete

May 02, 2010 The test results showed clearly that granite powder of marginal quantity, used as partial sand replacement, has beneficial effects on the compressive strength and split tensile strength, modulus of elasticity. The highest compressive strength was achieved in samples containing 25% granite powder.

Effect of Granite Dust as Partial Replacement to Natural

Sep 15, 2020 The possibility of using granite dust as partial replacement to natural sand in reinforced concrete beams is evaluated in this paper through a series of experimental investigations. The optimum sand replacement per cent is estimated through compressive strength tests on cube and cylindrical specimens. Then, three flexure-deficient reinforced concrete beams were cast using the blended fine

EXPERIMENTAL INVESTIGATION ON CONCRETE WITH

6. Manasseh JOEL –“Use of Crushed Granite Fine as Replacement to River Sand in Concrete Production” Leonardo Electronic Journal of Practices and Technologies ISSN 1583-1078 Issue 17, July -December 2010p. 85 96 7 .O. S. Olaniyan, O.M. Afolabi and O.M. Okeyinka “Granite Fines as a Partial Replacement for Sand

An Experimental Study on Partial Replacement of Cement

near granite mills. In this present work, granite powder is used as partial replacement of sand in concrete in different percentage and the associated compressive strength, flexural, and splitting tensile strengths of concrete have been evaluated. By doing so, natural resources of sand can be preserved and the health hazards of these industrial

A study of the chemical effect of marble and granite

Feb 04, 2020 A distinctive study was undertaken by Abhishek and Pradeep to examine the effect of partial replacement of sand with granite quarry dust and cement with marble powder in concrete. The results indicated that the compressive strength increased gradually by adding up to 10% replacement of cement with marble powder and 20% replacement of fine

Strength and Durability Properties of Granite Powder

of using granite powder as replacement of sand and partial replacement of cement with fly ash, silica fume, slag and superplasticiser in concrete. The percentageof granite powder added by weight was 0, 25, 50, 75 and 100 as a replacement of sand used in concrete and cement was replaced with 7.5% silica fume, 10% fly ash, 10% slag and

STUDY OF PARTIAL REPLACEMENT OF FINE AGGREGATE

crisis, partial replacement of sand with quarry dus t can be an economic alternative. In this project determi ne the strength and durability of concrete by using qu arry dust as sand and comparing with the conventional mi x. Large range of curing period of 28 days are conside r in the present study design mix of M20 grade concrete

Investigation on Strength Properties of Concrete with

2. It was concluded that on partial replacement of OPC by 5% and 10% of marble powder and fine aggregate by granite powder gives a gradual increase in compressive strength and also in tensile strength when compared to conventional mix. 3. To minimize the costs for construction with usage of marble powder and granite powder which is freely or

Table 2 from Partial Replacement of Sand with Quarry Dust

Corpus ID: 212579661. Partial Replacement of Sand with Quarry Dust in Concrete @inproceedings{Sukesh2013PartialRO, title={Partial Replacement of Sand with Quarry Dust in Concrete}, author={Chandana Sukesh and K. B. Krishna and P. S. Teja and S. K. Rao}, year={2013} }

Experimental study of concrete made with granite and iron

An experimental investigation has been carried out to explore the possibility of using the granite powder and iron powder as a partial replacement of sand in concrete. Twenty cubes and ten beams of concrete with GP and twenty cubes and ten beams of concrete with IP were prepared and tested.

partial replacement of fine aggregate by glass powder in

Apr 05, 2015 The partial replacement of glass powder as fine aggregate Makes the concrete strengthen. Thus our project states that concrete can be strengthen by glass powder replacement,which makes the waste in to useful, so the waste materials made in to use.

partial replacement of cement with granite powder

of using granite powder as replacement of sand and partial replacement of cement with fly ash, silica fume, slag and superplasticiser in concrete. The percentageof granite powder added by weight was 0, 25, 50, 75 and 100 as a replacement of sand used in concrete and cement was replaced with 7.5% silica fume, 10% fly ash, 10% slag and 1%

Study on Mechanical Properties of Concreteon Partial

Quarry dust, Foundry sand, Spent fire bricks, Sheet glass powder, Construction and demolition waste, etc. In present study copper slag and granite powder can be used as a partial replacement of sand. Granite stone powder, a by-product from the cutting process of granite stone used for flooring is